Product Introduction

Hammer crusher is able to break 600-1800 mm of material to 25 or 25 mm below a section of crushing equipment, mainly used to break a variety of medium hardness, compressive strength does not exceed 100Mpa, and water content is less than 15% of the material, such as coal, gypsum, brick, limestone and so on. It can also be used to break fiber structure, scrap wood, paper, asbestos cement with strong elasticity and toughness, etc., with a wide range of applications and strong practicability, it occupies a large proportion in the sand production line.

Performance characteristics

1. Its hammer head is cast by a new process with good wear resistance and strong impact resistance.
2. The crushing force can be adjusted according to user requirements, so as to control the particle size of the finished product.
3. The structure has good sealing, which solves the problem of dust pollution and body ash leakage in the crushing process.

Working principle

The hammer crusher mainly relies on the impact to break the material, and the material enters the crushing chamber by the impact of the high-speed rotating hammer head. The broken material obtains kinetic energy from the hammer head, rushes to the baffle and screen bar in the body at high speed, and at the same time, the material also impacts each other until it is less than the gap of the screen bar, and is discharged from the gap, and the individual larger material is broken on the screen bar again by the impact of the hammer head, grinding and extrusion, until the particle size requirements are met.

Structural profile

The main working part of the hammer crusher is a rotor with a hammer, which is mainly composed of a spindle, a disc, a hammer shaft and a hammer. The parts of the hammer crusher are cast with advanced high-quality materials, good wear resistance, strong impact resistance, durable, providing a strong guarantee for the stable operation of the hammer breaking machine and large output crushing.

Model parameter

Note: The equipment is constantly updated and improved, if the model parameters change, please refer to the contact.